Nitrate ISE BNC

The Vernier Nitrate Ion-Selective Electrode BNC Connector is a BNC-terminated electrode used to measure the concentration of nitrate (NO₃^–) ions in aqueous samples. Use with Vernier interfaces requires the Electrode Amplifier. Also compatible with Go Direct^® Electrode Amplifier and Go Direct^® Ion-Selective Electrode Amplifier.

Downloads

Product Manual NO3-BNC

Range (mV):
- Electrode Amplifier: -450 mV to +1100 mV
- Go Direct^® Electrode Amplifier: -1000 mV to +1000 mV
Range (concentration): 1 to 14,000 mg/L (or ppm)
Reproducibility (precision): ±30mV
Interfering ions: ClO₄^–, I^–, ClO₃^–, F^–
pH range: 2.5–11 (no pH compensation)
Temperature range: 0–40°C (no temperature compensation)
Electrode slope: +55 ±3 mV/decade at 25°C
Electrode resistance: 0.1 to 5 MΩ
Minimum sample size: must be submerged 2.8 cm

Nitrate Ion-Selective Electrode with BNC terminated end, packed with a storage bottle
30 mL bottle of Nitrate Low Standard (1 mg/L or 1 ppm NO₃^–)
30 mL bottle of Nitrate High Standard (100mg/L or 100 ppm NO₃^–)
Short-Term ISE Soaking Bottle