This American made lab deioniser can be mounted on a wall or inside a sink door. It can be plumbed in or attached by means of pressure hose and clips. It has a maximum input flow rate of 2L/minute at minimum cost. Complete with resistivity indicator light, removable refillable cartridge. Battery operated.

• Min Temperature : 7°C

• Max Inlet/Outlet Pressure Range : 300kpa

• Dispense Flow Rate : 60L/hr

• Delivery Flow Rate : 1L/min

• Resin Quantity : 0.45L

PLEASE NOTE: Installation of this unit is required to be completed by a qualified plumber. 

Note for the Plumber:

• Inlet/outlet: 1/4" (6mm)
• Inlet side to be installed with a Pressure Reducing Valve set at 250kpa along with an isolating/flowrate valve (1/4" / 6mm in size)
• Outlet materials must be Stainless Steel or PVC Pipe/Tubing to avoid erosion. Generally recommended to keep both sides uniform.

DIMENSIONS

300 x 120mm (L x W )